Author: Brayden Wright

The Basics of Roofing Installation

Brayden Wright Roofing , , , , , , , ,

A quality roofing installation starts with a clean slate. Your roofing contractor will lay tarps on your driveway or in front of your home to keep debris and mess from getting everywhere. 

Roofing

Next they will install the first row of shingles called the starter course. It consists of three tab shingles and has a self-sealing adhesive strip along the eave. The next shingle rows will be offset from each other. Reach out to Corpus Christi Roofing CO for expert assistance.

A roof is more than just the outer layer of your home; it protects you from the elements and keeps water out. A good roofing installation begins with proper preparation. This includes choosing a quality roofing material that satisfies climate, budget and aesthetic preferences. Thoroughly inspecting the underlying structure and securing necessary permits are also important.

Before beginning the actual roofing work, the crew should clear the area and remove all traces of old roofing materials. This is especially important if the roof is being repaired or replaced due to damage or wear and tear. This allows the roofing team to work safely and efficiently, and it prevents unforeseen problems from developing during installation.

Next, the roofing contractor should prepare the eaves and roof valleys. This involves installing drip edge flashing, valley flashing and ice and water sheathing. This helps keep water out of eaves and other areas where leaks often occur. The roofer should also install flashing around chimneys, wood stove pipes, certain vents and along hip roofs. The ridge cap is installed last, which adds extra protection to the crown of the roof.

Lastly, the roofing contractor should protect shrubs, flowers and other landscaping with tarps. This helps ensure that plants are protected from flying debris and that small pieces of old shingles don’t wind up in open drains. It is a good idea to cover any patio furniture or decorative items near the house as well, to prevent them from getting knocked over or damaged.

Even conscientious roofing contractors will kick up a lot of dust and other debris during a roof restoration. To avoid a messy cleanup, homeowners can move any belongings that are stored in the attic to another location until the project is complete. It’s also a good idea to cover any vehicles parked on the property with plastic sheets or tarps.

Finally, homeowners should consider scheduling their roof installation project for the early part of the day. This way, the roofing crew can get on and off the roof as needed without being at risk of overexposure to the sun’s heat. The crew will also be able to avoid the rain that often occurs in the afternoons, which can cause delays and slow progress.

Materials

The materials used for a roofing job play an important role in the final product. They determine not only the cost but also how long the roof will last, and can impact a home’s aesthetics, comfort and energy efficiency. There are many different roofing materials available, each with its own advantages and disadvantages.

Some of the most popular are asphalt shingles and clay tile. Asphalt shingles are affordable, easy to install and come in a variety of colors and styles. They can be purchased as three-tab shingles, which provide a simple, slate-like appearance, or architectural shingles, which offer a more dimensional look.

Another option is clay or concrete tiles, which add texture and elegance to a roof. While they are more expensive than shingle options, they last 50 years or more and can complement Mediterranean, Mission and Southwestern-style homes. However, these roofs are heavy, require special framing and can impose an additional load on the house’s structure.

Rubber is a sustainable roofing material that can be made to mimic the appearance of other types of roofing materials. It’s less expensive than tile and shake, but requires regular maintenance and has a distinctive odor.

Rolled roofing is a practical and economical choice for low-slope residential roofs, as well as outbuildings like sheds and garages. It consists of large rolls of mineral-impregnated and asphalt-impregnated material topped with mineral granules.

Flat-roofing is a more complicated roofing system that requires professional installation and special materials to prevent leaks. It can be treated with a single-membrane system, such as EPDM or rubber, or thermo-polyolefin (TPO), or a PVC membrane. Metal roofing can also be used on flat roofs.

The other essential equipment for any roofing job is safety gear, including a hard hat and safety goggles. This is to protect the head and eyes from flying debris, such as nails, wood splinters and shingle pieces. Other items to consider include a caulk gun and roofing caulk, gloves, a nail punch, a tape measure, a utility knife, a hammer and tin snips. A tarp should also be placed on the ground around the work area to catch stray shingles and other debris.

Installation

During this phase, the roofing contractor will tear off your old roof. They will take several steps to protect your property before this process starts, including covering shrubbery and garden areas with tarps and using wooden boards to cover open drains to prevent small pieces of debris from clogging them. They will also set up a dumpster to contain the waste and ensure your yard stays clean and safe.

When the new underlayment is in place, the roofer will begin laying the shingles. They will overlap the starter strip by six inches and follow a pattern that involves closer nails near the edges and nails farther apart as they move up towards the ridge. The shingle rows will be finished with the underlayment to ensure a strong, leak-proof seal.

Once the roof is installed, the crew will clean up and remove all equipment and trash from your property. They will also inspect the finished job and make sure everything is in working order. If any repairs are necessary, the roofer will handle them as quickly as possible to minimize disruption to your home.

Maintenance

When roof maintenance is regularly done, it can help prevent damage and prolong the lifespan of your roofing materials. This preventative measure can also save money on energy costs and reduce repair bills in the future. In some cases, your insurance company may even offer a discount on your premiums.

A good maintenance program is tailored to the needs of each individual roof and should be documented in a checklist. This checklist should be kept on file for reference, and can be used to determine if a problem requires immediate attention or a planned roofing repair project.

The first step of a maintenance program is to inspect the existing roofing materials. Examine the shingles, tiles or metal roofing to make sure all components are intact and free of damage. Also look at the flashing, which is a layer of thin material, often made of galvanized steel, that is installed over the joints of the roof plane to direct water away from areas where the roof meets a vertical surface such as a chimney or dormer.

Another thing to do is remove debris from the roof surface, including accumulated dirt, leaves, sticks and twigs that can scratch or puncture flat roofing materials. This also includes clogged drains and gutters, which can cause leaks. Finally, trim any trees or vegetation that overhang the roof, as these can be a hazard during stormy weather.

After the roof has been inspected, it’s time to prepare the property for the roofing crew. This involves covering the garden or landscaping, moving anything that could be damaged by roofing debris and setting up tarps to protect plants from flying debris. It’s also a good idea to cover any vehicles on the driveway with tarps or boards, and ensure that all workers are keeping their feet dry.

Once the work begins, the roofing contractor will take care to protect the interior of the building from leaks while removing the old shingles. Once this is done, they will install the new shingles and flashing and clean up the area. Then, they will inspect the entire roof again to make sure all problems have been addressed. This is the time to catch any minor problems that can become major ones if left unattended, like a crack in the flashing that should be re-caulked.

Basement Finishing Adds Living Space, Value and Comfort to Your Home

Brayden Wright Home Improvement , , , ,

Finished basements add living space, value and comfort to your home. Basement finishing involves insulating and framing walls, drywall and installing flooring.

Basement Finishing

Basement plumbing is often roughed in to avoid costly repairs later. Basement Finishing Lehi professionals can also rough in HVAC ducting, electrical outlets and lighting fixtures.

Basement flooring must be water resistant, as moisture is a constant threat. Vinyl floors are a good choice, as is engineered wood that can handle humidity.

During basement finishing, it is crucial to install the right type of insulation. Insulation helps reduce noise from upstairs and protects against cold air leaking in from outside, making your home more energy efficient and comfortable. You can use conventional batt or roll insulation, but it is best to choose moisture-resistant products for basements. Conventional building materials are susceptible to water damage, which leads to mold, staining and warping. Basements are prone to groundwater leaks and humidity, so you need a product that can stand up to moisture and condensation.

Rigid foam insulation boards are ideal for the basement. They come in different thicknesses and can be cut to size with a utility knife or saw. They are available with or without facings, and they can be installed either on the interior or exterior of your basement walls. Foam board offers superior thermal resistance than a typical batt insulation, and it also greatly reduces heat conduction through structural elements such as steel and wood studs.

Foam board is also a good choice for a basement wall sheathing, and it can be used in areas of the basement that will require future access to plumbing, electrical wiring or surface-mounted wires and pipes. It is also an excellent material for insulating basement walls adjacent to a foundation, as it can be easily cut with a utility knife.

Spray-in-place foam insulation is an effective solution for a basement, as it can be applied directly to the wall framing, or it can be placed over existing walls. It is available in a wide range of R-values, and it provides an air seal and a thermal barrier. It is easy to install, and it can be cut with a utility knife or saw. It is important to use an adhesive that is formulated for use with foam, as conventional construction adhesive won’t work.

Before beginning a basement finishing project, you should test the basement for radon and address any problems found. Radon is an odorless gas that seeps into basements from the soil below, and it can be a serious health risk. You can hire a professional to test your basement for radon and fix any issues found, such as sealing cracks and insulating your basement walls.

Walls

The first step in basement finishing is insulating and framing the walls. Several methods are available for both of these tasks, and it is best to consult with professionals early in the project to learn which method is right for your home. This will also give you a chance to discuss any issues that could affect the final outcome of your project, such as water leaking or other structural problems that need to be addressed before moving on with your project.

Basement walls can be framed with wood studs and drywall or with prefabricated systems built by a professional. Depending on the materials you use, the wall finish can be something as simple as painting or as complex as a stucco finish.

Most municipalities require that any living space in the basement meet stringent building codes. These codes include requirements for insulation, moisture protection and fire-prevention elements. It is wise to become familiar with these rules before starting the project, as they will help you stay within the guidelines and avoid costly mistakes.

One of the biggest problems with a basement is water seepage through foundation walls. To prevent this, a waterproof barrier must be installed over the concrete before any drywall is applied. This is not a job for the do-it-yourselfer, but if you are willing to spend some time and money, you can avoid serious damage to your home.

Many homeowners choose a drywall basement finishing system, which is quick and inexpensive. It is also easy to remove for foundation access, helps absorb sound and is naturally mold- and mildew resistant. This type of system isn’t completely waterproof, however, so you may want to consider using another type of finish for the bottom section of your basement walls, such as a waterproof panel from Owens Corning.

When framing a basement wall, be sure to leave access panels for any service lines that run through the walls or ceiling. These might include plumbing pipes, ducts or electrical junction boxes. You can frame these sections with soffits or cut out areas of the drywall to allow future access, as long as you keep the area in good working condition.

Ceiling

The most visible part of any basement is the ceiling, so it’s an important area to consider when designing your basement finishing project. Whether your basement is going to be a home entertainment room, bedroom, home office, playroom or a combination of uses, the ceiling design will have a big impact on the overall feel of the space.

A variety of ceiling options are available, including drop ceilings, drywall and leaving the ceiling open. Each has its benefits and disadvantages, as well as installation instructions and difficulty levels. Drop ceilings are the easiest option to install and replace but don’t offer the same aesthetic as a drywall ceiling.

Leaving pipes, wiring and ducts exposed saves money on the cost of a ceiling but requires that you be careful to route these items properly to avoid leaks and fire hazards. This type of basement finish can also look messy and unfinished.

If you want to minimize costs while keeping everything accessible, choose a ceiling option that hides these elements with a frame on which removable ceiling tiles rest. These are the least expensive option but do not offer a finished appearance and you’ll still need to install and maintain lighting fixtures.

Drywall ceilings can be installed and painted in a variety of ways to create a unique, functional and attractive finish. If you are choosing this method, remember to add insulation around the perimeter of the ceiling to prevent heat loss and keep the space comfortable.

To minimize the risk of leaking and mold, choose a basement finish that is resistant to moisture. Leaks and mold can be costly to repair, especially in a finished basement.

Basements are prone to moisture damage, so it is important to install a water barrier behind the walls and prepare the exterior of the building for drainage. Installing gutters and grading the yard to direct rainwater away from the foundation walls are just as critical as installing a moisture barrier in a basement.

A finished basement will include framing, running whatever mechanicals are necessary, and installing wall and ceiling finishes. Although some of the work can be done yourself, the bulk of this job should be performed by licensed professionals. If you are working with a contractor, ask them to provide detailed plans and details of the work they plan to perform.

Floors

Turning your basement into a livable space isn’t just about putting down new carpet and painting the walls. You’ll need to consider what you want the floors and ceilings to look like, too. These tend to be the biggest expenses for a basement finishing project, so it’s important that you give this area of your home proper consideration.

There are a lot of flooring options that work well in a basement, including vinyl, tile, and concrete. Each has its own unique advantages, but they all have one thing in common: moisture resistance. Vinyl is a good choice because it’s easy to clean, affordable, and comes in designs that imitate the appearance of wood planks or tiles. Tile is also a great option because it can be designed to look like marble or stone and offers high durability. Concrete is another excellent choice because it’s highly durable and can be treated with a variety of decorative methods to complement your basement design scheme.

You can even use a polymer-modified cement-based overlay that is stampable, self-leveling, and can accept chemical stains, dyes, and stenciling (see Myth #7). This treatment can hide minor cracks and create a rustic or modern look that’s perfect for a finished basement.

Keep in mind that the floor and ceiling will need to accommodate utilities, such as ductwork, pipes, and wiring. To save money and headroom, it’s often better to leave these exposed rather than enclosing them in a drop ceiling.

If you do decide to enclose these fixtures in the ceiling, frame around them with 2x2s and use drywall to hide them. This will allow you to still access them if future repairs are necessary. It’s important to save as much headroom in your basement as possible because it will make the room feel bigger and help with ventilation.

Some parts of a basement finishing project can be done on your own, but the bulk of the work should be completed by a professional. This will save you time, ensure that your project is done properly, and can prevent costly mistakes that could be expensive to correct later on. Professionals will also be familiar with local building codes and permits, which may be required for some portions of the project.

Expert Tips For Painting Drywall To Achieve A Smooth & Professional Finish

Brayden Wright Handyman , , , , , ,

If you’ve recently constructed new drywall or painted over old walls that aren’t as smooth, you’ll need to do some prep work before painting. Skipping this step can result in poor adhesion and unattractive results.

Proper Painting New Drywall ensures that the paint adheres properly and lasts longer. Here are expert tips to get you started:

drywall

Apply a Primer

A primer is like the glue that holds a paint job together, and there’s no reason to skip it. It ensures a smoother application of your top coat, blocks some stains, and improves the adhesion of paint to drywall.

It also helps even out the color of a wall, which is particularly important on new walls or those that have had previous coats of paint. Different surfaces absorb paint at different rates, and without equalizing them with a primer that’s made for drywall, you’ll see a gap in the color once your new coat goes on.

There are several types of primers to choose from, and selecting the right one for your project depends on several factors. If the drywall is smooth and free of chips and cracks, a basic flat latex primer will suffice. For textured drywall or to cover a stain, use a special drywall primer that’s tinted to match your finish paint. If you have mildew or mold problems, first scrub the affected area with bleach and then rinse and dry the wall section before applying a mold-neutralizing oil-based primer. If you’re concerned about odors, there are several odorless primers available, including an odorless primer.

Before you apply your primer, it’s a good idea to hold a bright work light over the surface and look for any imperfections. Dim the room lights and hold the light about 3 to 4 inches (7.6 to 10.2 cm) away from the surface, and use it to find cracks, dents, or other irregularities that need to be addressed before you start painting.

During this step, it’s important to wear a mask. The sanding process creates a lot of dust, and if you breathe it in, it can cause respiratory problems. If you’re using an oil-based primer, it’s even more important to use a mask to avoid the fumes.

Once the sanding is complete, you’ll need to clean off any remaining dust with a damp rag. It’s also helpful to make sure the weather is cool and dry, as primer takes longer to dry in humid conditions.

Sand the Walls

The next step to painting drywall to get a smooth and professional finish is sanding. After the primer has dried, it’s time to give the walls a light sanding with a multi-grit sponge. This will remove any flaking paint and rough areas, as well as create a more even surface for your final coat of primer and subsequent paint layers. When sanding, make sure you wear a mask. Drywall dust is very fine and can irritate the lungs if inhaled. You should also cover any furniture and doorways with plastic sheeting to protect them from any sanding dust.

When sanding, it’s important to move in one direction only to avoid any gouges in the drywall. Also, be very careful when sanding around outlets and electrical boxes. If you gouge the drywall, you may have to repaint the entire box, which can be costly.

After sanding, make sure you wipe down the walls again to get rid of any loose dust particles and dirt. You should also wipe down any wall hangings and decorations, as well as remove any items on the walls to prevent them from getting wet or covered in paint. Once the walls are clean, check them for any nail holes, bumps, or divots that need to be repaired. These can be filled with spackling paste, putty, or wall-filling depending on the severity of the problem.

Once you’ve repaired any dents or holes and sanded the walls, it’s time to apply your first coat of paint. It’s always best to use high-quality paint, especially if you’re using a semi-gloss or gloss finish. The higher-quality paints will hold up better to moisture and other elements that can cause the paint to chip or peel over time.

If you’re using satin or flat paint, sanding between coats of paint isn’t necessary. However, if you’re using high-gloss or semi-gloss paint in a bathroom or kitchen, sanding between coats will help to achieve a silky-smooth layer of paint. This will ensure a beautiful, long-lasting finish.

Patch Holes & Cracks

Drywall is a durable material that can stand up to most wall hangings, but it’s not impervious to damage. Holes, dents, and cracks can mar the surface of your drywall walls, often as a result of moving furniture or nailing things to the wall.

Minor blemishes can sometimes be covered up with a dab of paint that blends into the existing color of your walls. But if the hole or divot is large, it’s important to patch it before painting, so that you get a smooth, flawless finish.

First, clean the area around the hole or ding with a damp cloth to remove dust or debris. Then, scoop up a small amount of spackling compound with a putty knife and apply it directly over the hole or ding, spreading evenly with your knife. Allow the spackling to dry completely, which can take up to five hours. Then, you can either “dry-sand” the patch using a sanding block to a smooth surface or wet-sand it by running a sponge over the area. When you wet sand, the drywall will expand slightly, which can help to eliminate any unevenness in the patch.

If the hole is in a corner of your room, it’s also a good idea to sand and repaint the adjacent drywall. This will ensure that the new drywall blends seamlessly into the rest of the wall.

Another common problem with drywall is unsightly humps where the drywall meets the edge of a piece or a different wall. These humps are caused by poorly feathered edges or a lack of sufficient joint compound when the wall was originally taped. To fix these, sand the edge of the drywall to smooth it, then overlay a wide layer of joint compound on the hump to blend it into the surrounding wall.

You may also need to sand and repaint areas of your drywall where there is a lot of damage or if you’re painting over a dark color. Be sure to prime any repaired areas before applying your paint, as unprimed drywall will absorb the new paint and show through.

Paint Like a Pro

Painting standard walls is a fairly straightforward process. However, when it comes to painting drywall, the process requires a bit more care and attention to detail to achieve a professional finish. The good news is that with the right knowledge and tools, anyone can learn how to paint drywall like a pro!

In addition to sanding the walls before priming and patching holes and cracks, it’s also important to properly prepare drywall surfaces for painting. This involves cleaning and priming the wall, which helps to ensure that your paint job will last longer and look more professional.

It’s best to start the painting process by cleaning the walls with a damp cloth to remove any dirt or debris. After the wall is clean, you can prime it using a brush or a roller and allow it to dry thoroughly before proceeding with the next step. Once the primer has dried, it’s time to apply a coat of paint. Depending on the color of the previous paint, you may need to apply two or more coats of paint to get an even and smooth finish.

Before painting your drywall, it’s important to ensure that all of the joints and seams are well caulked. This is crucial to help prevent water and moisture from seeping through the drywall and causing damage or causing mold and mildew. You can purchase caulking products at most home improvement stores, and they are easy to apply.

It is also important to choose the right type of paint for your drywall. There are a variety of different paint finishes available, including satin and semi-gloss. Satin is great for living rooms and bedrooms, while semi-gloss is better for bathrooms and kitchens, as they are subject to more wear and tear and require a higher level of durability.

By following these simple steps, anyone can learn how to paint drywall to achieve a smooth and professional finish! We hope this article has been helpful and that you will soon be able to take on your drywall painting projects with confidence!

The Benefits of Pressure Washing

Brayden Wright Pressure Washing , , , ,

Pressure Washing Summerville SC is an effective way to clean concrete and other exterior surfaces. It removes ingrained dirt, mildew, mold, and other contaminants without damaging the surface.

Start using a soaping (black) nozzle at least 18 – 24 inches from the surface and test on an inconspicuous area first. Gradually move closer or switch nozzles as needed.

pressure washing

Dirt, mildew, moss, and algae can eat away at surfaces over time, shortening their lifespan and creating a unsightly appearance. Pressure washing removes these growths, restoring the beauty of exterior surfaces and prolonging their usefulness. In addition, periodic cleanings help to keep them at bay, preventing further damage and saving you from expensive repairs.

Cleaning surfaces with a pressure washer is quick and easy. A detachable reservoir holds cleaning solution that attaches to the nozzle of the washer, creating a spray of water combined with soap and debris. This powerful spray is ideal for concrete, brick, and paved areas, and works well on outdoor furniture, grills, car ports, and decks.

Before using a pressure washer, it’s important to prepare the area by relocating items like potted plants and patio furniture. Also, sweep away loose dirt and debris, covering nearby plants with tarps if needed, and shutting off electrical outlets and other features that could get wet or damaged by the pressure of the spray. It’s also a good idea to choose a day that isn’t too windy, as the force of the water can blow things around.

Once you’re ready to begin, start by adjusting the nozzle of the pressure washer to a low setting that will prevent damage. It’s also a good idea if you’re working with a concrete surface to use a cleaning solution made specifically for this material, as excessive force can cause it to etch. Then, move the hose or wand around the surface to be cleaned, making sure not to miss any spots. When you’re done, rinse thoroughly with clean water to avoid streaking. Repeat as necessary to completely remove dirt and debris from the surface.

When you’re ready to get started, turn the pressure washer’s nozzle down to a low setting to avoid damaging anything. Using a cleaning solution designed especially for concrete is also a good idea when working with it, as using too much force can etch the surface. Next, carefully move the hose or wand over the surface that needs to be cleaned, being careful not to miss any areas. To prevent streaking, thoroughly rinse with clean water after finishing. To get rid of all the dirt and debris from the surface, repeat as needed.

Using the right nozzles on a pressure washer, it’s possible to dislodge stubborn stains and restore surfaces to their former glory. Oil spills, mildew, moss, rust, and more are all easy to remove with this cleaning technique.

With the correct pressure washer nozzles, it’s possible to remove tough stains and bring back the original beauty of surfaces. Using this cleaning method, rust, moss, oil spills, and mildew are all easily removed.

It’s also a great way to prepare surfaces for renovation. If you’re thinking about painting your home or office, getting rid of built-up dirt and mildew first will ensure that the paint sticks better and lasts longer.

You can even use a pressure washer to remove pesky graffiti. The key is to find a professional service that knows how much psi and waterflow are necessary to remove stains without damaging the surface beneath. The right service will know the correct cleaning solutions to use for different surfaces, as well, so that the results are beautiful and long-lasting.

Regular pressure washing also keeps the build-up of grime from becoming ingrained, which is much easier on surfaces than trying to scrub them down manually. It also prevents bacteria and vermin from breeding on dirty surfaces, keeping your family or employees healthy.

The best part about this method of cleaning is that it does all of this without introducing harmful chemicals into the environment. This is good news for people with allergies, as well as those who want to protect their environment. Before starting to spray away, be sure to remove anything that could get wet (like potted plants or patio furniture), and cover any electrical outlets or doors that might be exposed to water. Then, enjoy your newly-restored surface! And don’t forget to schedule regular cleanings so that your home or business looks fresh and clean year-round. Remember: an ounce of prevention is worth a pound of cure!

Besides boosting the curb appeal, a thorough cleaning of your building’s surfaces helps to protect them. Mildew, mold, and dirt can cause serious damage to the exterior of your home or business if left unchecked, and can eventually penetrate into the inside as well. Pressurized washing eliminates these contaminants and halts their spread, keeping your exteriors looking newer for longer.

When done properly, pressure washing can also extend the life of your paint job. However, it’s important to know that not all surfaces can withstand high levels of pressure. For instance, brick and stucco can be damaged by too much pressure, as can softwood and certain types of paint. Using a lower pressure level and starting from the bottom is key to preventing damage. A professional will understand the different pressures and water rotation needed for various surfaces, and can expertly clean them without damaging them.

Another issue that can arise is chemical runoff. When you use soap or other harsh chemicals with a pressure washer, the runoff can seep into the soil and wash away debris, killing surrounding plants. It can also reach bodies of water and cause harm to wild animals and aquatic life. A professional will take care to minimize this effect by reducing the amount of water used and using non-toxic chemicals whenever possible.

While it’s tempting to try your hand at pressure washing, it is a task best left to professionals like the friendly team at It takes years of experience to understand how to navigate the different pressures and water flows, as well as to get into tight spaces to remove stubborn stains. It’s also important to have the right equipment and a proper understanding of how to use it safely.

Pressure washing removes organic growth like mold, mildew and algae that attract insects and rodents to the property. By eliminating these growths and disinfecting the surfaces they were on, it’s harder for pests to settle around a home and create an infestation. It also prevents the spread of these organisms throughout the yard and into the house itself. This can save money on costly pest control services down the line.

In addition, pressure washing wards off pests by brightening up the surfaces of a house and deterring them from landing on it. Many insects are attracted to dark areas, so when dirt or moss build up on a property, it makes the area darker and more appealing to these pesky creatures. Using a high-pressure washer to clean these areas can make them much less attractive and help deter the pests.

It also removes cobwebs that attract bugs to a property, making it harder for them to enter the house. A homeowner can spend thousands of dollars on pesticides and other treatments if an insect infestation is allowed to take over their residence, so avoiding them altogether by having your house regularly pressure washed may save you money in the long run.

Lastly, the high-pressure water stream used in pressure washing can remove harmful microorganisms that are known to cause allergic reactions in people. These microorganisms can be airborne, which means they can be inhaled by residents, especially those with allergies or asthma. The powerful jet stream of the pressure washer can also remove these microorganisms from exterior surfaces without the need for harsh chemical cleaners. By reducing their presence around exterior surfaces of the home, it’s easier for people to enjoy the outdoors without compromising their health.